HUAIN 4K30 Distributed Input/Output Node HY-PM200-IN HY-PM200-OUT

1. It adopts a distributed architecture design of the Linux system and a decentralized framework.

2. Fanless and silent design, aluminum alloy body design, supports independent installation in a 1U cabinet or two units can be installed side by side simultaneously.

3. It adopts H.265 data stream codec chips and is backward compatible to ensure the smooth operation of the system.

4. Supports RTSP and RTMP protocols, private protocols, 2 HDMI channels, embedded audio synchronous or asynchronous input, and port backup support;

5. Supports AAC, G.711, G.726, private protocols, CBR/VBR, adjustable frame rate from 1 to 60fps, audio input interface, embedded audio synchronous or asynchronous input, volume adjustment, and three mixing methods. Supports multi-channel audio mixing and playback with lossless audio quality.

It is equipped with 1 factory reset button, 4 USB2.0 interfaces, 1 Gigabit Ethernet port, 1 Gigabit optical port, 2 HDMI video input/output interfaces, 2 3.5mm audio input/output interfaces, 2 3-pin Phoenix terminal audio interfaces, 1 relay interface, 1 RS232 interface, 1 RS485 interface, and 1 IR/IO connection 1 port, 1 IO interface;

7. Supports hot backup of 1 optical port and 1 network port, supports dual power supply modes of POE and external power supply, and is equipped with input and output node switching switches, serving as two devices in one.

8. Supports 3840×2160@30Hz, backward compatible, supports fixed-rate transmission, adjustable range 128kbps to 40Mbps, supports unicast and multicast;

9. Ipc-encoded cameras that support H.264 and H.265, the signals of IPC network cameras can be directly output and displayed on large screens without the need for third-party transcoding servers, and support the zooming, pushing far, and left and right rotation of pan-tilt units, etc.

10. It supports the classification, grouping and sorting management of signal sources. All signal sources can be managed in three-level groups and displayed in a tree form. They can also be sorted by name, IP or custom methods. The client software supports no less than 50 real-time dynamic image preview displays.

11. Supports mirror mode. You can set a mirror screen. When the main screen performs operations, other mirror screens follow the operation.

12. It supports the interaction between tablets and seats. Any signal source can be pushed to the seat through the tablet to achieve interactive operation.

13. It supports button linkage function, enabling one button to control multiple buttons for box control and network control.

14. The function of displaying audio on the wall separately can be achieved through the visual control software to display audio on the large screen separately.

15. Annotation function: You can mark the large screen on the software end with arrows, symbols, ellipses, squares, text, etc., and synchronize them to the large screen with one click.

16. Supports remote KVM control, allowing the agent to remotely control the computers in the computer room and turn them on and off, and supports sleep and wake-up. Supports seat end push of large screens. Any video source in the list can be pushed to the local or remote spliced large screen for full-screen display through the local agent. Windows can be opened, roaming, superimposed, drawing, etc. Real-time preview of signal sources and virtual screens is available.

17. It supports video and voice intercom as well as text chat for agents. Agents can directly communicate one-on-one through video, voice and text. Supports inter-seat broadcasting. Seats can speak one-to-many or speak from the seat end to the entire hall environment.

18. It supports multi-party meeting mode, allowing more than 16 operators to enter the meeting interface simultaneously, and supports 16-channel mixing. Participants can be added or removed at any time during the meeting.

19. It supports the pre-operation mode at the agent end, allowing for layout in the virtual screen area. The process of adjusting the screen will not be displayed in real time on the large screen. When the push screen button is clicked, the adjusted layout can be displayed on the screen with one click to prevent accidental operations.

20. Support mutual signal requests and push notifications among seats; Support three-level permission management; Support large-screen signal capture. Support large-screen partition management; Support the saving and retrieval of contingency plans on both the agent end and the large screen.

21. It supports multiple login methods (account password, fingerprint, and facial recognition login), and has a seat memory function. Seat personnel are not limited to the current seat. Logging in from any seat retains the original layout without the need for a new layout.

22. Support message queue prompts on the agent side; Signal up and down lines, other message delivery reminders, etc.

23. It supports the top and bottom menu bars of the OSD. All tasks such as pushing the screen, pushing seats, taking over, controlling, requesting, and visual intercom can be completed with just the mouse. It also supports shortcut key operations.

24. The system scenario can provide a one-click recovery function; The node device has programmable storage capabilities and can automatically restore the system to its pre-power-off state after a power failure and restart, such as volume level, large screen switch, signal position, lighting environment, etc.

25. It supports local viewing of node status from the seat, allowing users to check the version information of their own nodes, the IP address of the device, the IP address of the server, the usage of CPU and memory, network speed, running time, etc. without the need to mobilize other software.

26. It supports distinguishing channel status modes through channel box colors, including border colors such as takeover, control, receive, and no signal. Each border has no less than 11 color options. It supports changing the width of the signal box, with a maximum support of 3px, and also allows the border to be hidden.

27. It supports setting the position and size of the floating ball for each signal channel. The position information includes three Settings: low, medium and high, and the size includes three forms: large, medium and small. It can be set according to the operator's habits.

28. Support OSD superimposed display of device names, times, logos, etc. Supports dual logos, and the text of the logo can be modified.

29. Supports OSD subtitle overlay, high-definition background images, automatic recognition of EDID extended display identifiers, and HDCP.

30. It supports the display of node LCD screen status, which can be displayed in multiple layers of columns. The IP address is displayed in solid state, and the node name, signal status, temperature, network status, etc. are displayed dynamically.

31. It supports the node roll call function. After the software selects a node, the node's LCD screen will keep flashing, which is convenient for locating the node.